The update should be carried out by an authorised technician.
Press the MENU button 13, turn knob 16 until “Settings” is displayed and confirm by pressing knob 16.
Select “Software Update” and press knob 16
to confirm.
Remove the USB port cover. Insert the USB key in the USB port on the oven.
Select “START” by turning knob 16 and confirm by pressing knob 16.
The update starts, when the message below appears, press knob 16 to complete the update.
When the program has finished, disconnect the power supply to the oven by turning off the switch upstream of the device without removing the USB key.
Switch the oven on again and wait until the update is completed.
CAUTION: After removing the USB key, put the cover back in place.