SWITCHING ON
Press knob 16 for 3 seconds.
SELECT THE COOKING MODE
Press the desired cooking mode button (1 - 2 - 3). The cooking mode led will remain lit with a fixed light. The oven starts.
SETTING THE TEMPERATURE
The default temperature is shown on the temperature display. Turn knob 7 to set the temperature (right to increase, left to decrease), which will be shown on display 6. Confirm by pressing knob 7 or wait 10 seconds.
SETTING THE TIME
The time display 10 reads [InF]. Turn knob 11:
- to the right to set the cooking time;
- to the left to set an infinite cooking time [InF] or preheat the cooking chamber [PrE].
Or
SETTING THE CORE PROBE
See the article “How to enable the core probe?".
Confirm by pressing knob 11 or wait 10 seconds.
SETTING AUTOMATIC MOISTURE CONTROL
See the article “How do you set the automatic moisture control?".
Confirm by pressing knob 7 or wait 10 seconds.
SETTING THE FAN SPEED
Press button 12. To set the fan speed, turn knob 16 (right to increase, left to decrease), which will be shown on display 15.
Confirm by pressing knob 16 or wait 10 seconds.
SET ALTERNATING FAN:
To set alternating fan, turn the knob further left until the symbol below lights up.
To set the fan speed, turn knob 16 (right to increase, left to decrease), which will be shown on display 15.
Confirm by pressing knob 16 or wait 10 seconds.
START COOKING
Insert products for cooking into cooking chamber. Also see chapter “"Practical recommendations".
If you have chosen standard cooking with the core probe, see article ““How to enable the core probe?".
A questo punto ...
il display temperatura 6 indica la temperatura impostata della camera di cottura.
Il display tempo 10 indica il tempo mancante al completamento della cottura.
Now...
temperature display 6 shows the real temperature of the cooking chamber.
time display 10 shows how much time remains until cooking is complete.
END OF COOKING
If infinite cooking time has been selected, stop cooking manually by pressing button 14.
If a cooking time or a temperature for the core probe has been set, when the time has expired or the temperature set for the core probe has been reached, an acoustic signal will notify you that cooking has finished. (cooking mode led flashing)
To stop the sound, simply open the door or turn knob (7 - 11).
Remove the product from the cooking chamber.
Note: the first time the device is switched on every day, the steam generator drains the water in it, activates the time wash of the steam generator, then, after the water is filled, it switches to AUTOMATIC PREHEATING of the steam generator. If a programme with steam or mixed cooking cycle is started, the programme starts automatically as soon as the steam generator reaches the preheating temperature to prevent the programme from starting if there is no steam present.