Premise
The oven allows the t empor ar y modification of the stored programme,
i.e. for the current cooking operation only.
This may be essential when the programme is stored for a product with a different size, therefore it may be necessary to increase cooking times, raise the temperature or change any other type of parameter.
RECALLING
Recall the set programme and start cooking as per previous instructions.
To modify a stored programme:
Cooking mode
... press the button that corresponds to the desired cooking mode (1 - 2- 3), the change will be automatically saved.
Increasing/decreasing the temperature
... turn knob 7 to set the new temperature, confirm by pressing knob 7 or wait 10 seconds (TIME OUT), the change will be automatically saved.
Increasing/decreasing the time
... turn knob 11 to set the new time, confirm by pressing knob 11 or wait 10 seconds (TIME OUT), the change will be automatically saved.
Increasing/decreasing the core probe temperature
... turn knob 11 to set the new temperature, confirm by pressing knob 11 or wait 10 seconds (TIME OUT), the change will be automatically saved.
Increasing/decreasing the AUTOMATIC MOISTURE CONTROL value
... press button 5, turn knob 7 to set the new value, press button 5 to confirm or wait 10 seconds (TIME OUT), the change will be automatically saved.
Note: Display 15 shows the icon below and indicates the temporary change to the programme.
The change will be deleted when cooking is complete: the original version of the programme will remain.
.