Zoom - How do you connect the blast chiller drain?

 

CABINET: The cabinet is fitted with 2 drains.

Washing, cleaning and defrosting drain connected to the drain tray located under the appliance. The washing water is collected in a tray located under the appliance. To avoid having to empty it too frequently, it is advisable to connect the drain to a flexible hose with a maximum length of 200 cm (not supplied) and take it to a floor grille or to a wall drain.

Humidification system drain: the blue humidification system drain must be connected to a floor drain point. Failing this, by moving the previously indicated tube inside the technical compartment and securing it to the washing drain tube, it is possible to drain the water into the appropriate collection tray, which must be emptied every 4 hours.

 

CELLS: The cell is equipped with 2 drains.

Defrost which is located in front of the appliance on the side of the door is recommended to be connected to a flexible hose (not supplied) and taken to a floor grille.

Blue humidification system drain, must be connected to a floor drain point.

The drain pipe must have the following characteristics:

  • is of trap type;
  • has a minimum inclination of 4%;
  • has an air gap* of at least 25 mm;
  • does not have clamps;
  • has a diameter not under that of the drain pipe