SWITCHING ON
Press knob 16 for 3 seconds.
5.1 SELECTING A PROGRAMME
Press the MENU button 13, turn knob 16 until “New programme” is displayed and confirm by pressing knob 16.
Turn knob 16, select one of the free programmes and confirm by pressing knob 16.
SELECT THE COOKING MODE
The Leds on cooking mode buttons flash: press the desired cooking mode button (1 - 2 - 3). The cooking mode led will remain lit with a fixed light.
SETTING THE TEMPERATURE
The default temperature is shown on the temperature display. Turn knob 7 to set the temperature (right to increase, left to decrease), which will be shown on display 6.
Confirm by pressing knob 7 or wait 10 seconds.
SETTING THE TIME
The time display 10 shows [ PRE ]
Preheating, turn knob 11:
- to the right to set the cooking time;
- to the left to preheat the cooking chamber [PrE].
Or
SETTING THE CORE PROBE
See the article “How to enable the core probe?".
Confirm by pressing knob 11 or wait 10 seconds.
SETTING AUTOMATIC MOISTURE CONTROL
See the article “How do you set the automatic moisture control?".
Confirm by pressing knob 7 or wait 10 seconds.
SETTING THE FAN SPEED
Press button 12. To set the fan speed, turn knob 16 (right to increase, left to decrease), which will be shown on display 15.
Confirm by pressing knob 16 or wait 10 seconds.
SET ALTERNATING FAN:
To set alternating fan, turn the knob further left until the symbol below lights up.
To set the fan speed, turn knob 16 (right to increase, left to decrease), which will be shown on display 15.
Confirm by pressing knob 16 or wait 10 seconds.
SELECTING PHASE 2 AND SUBSEQUENT PHASES (UP TO 9 PHASES)
Turn knob 16, select “New phase” and confirm by pressing knob 16.
Set as per paragraph 5.3. If additional phases are needed, follow the same sequence.
STORING THE PROGRAMME
Turn knob 16, select “Save” and confirm by pressing knob 16.
SETTING THE PROGRAMME ICON
Turn knob 16, select “Icon” and confirm by pressing knob 16.
Turn knob 16, select the desired icon and confirm by pressing knob 16.
SETTING THE PROGRAMME NAME
Turn knob 16, select “Name” and confirm by pressing knob 16.
Set the name of the programme by turning the knob and confirming the selected letter by pressing knob 16. After setting the programme name, select “OK” and confirm by pressing knob 16.
SAVING
Select “Save” and confirm by pressing knob 16.
