Top panel
To access components you must remove at first the top panel.
There are three screws on the back which can be used also to fix the container on the top
two screws on the front.
Once removed the screws pull from the back.
Side panels
To remove side panel remove the two screws on the back.
Once removed the screws slide back side panel.
Rear flap
To remove the rear flap remove the two screws.
Rear panel
To remove the rear panel remove the four screws
than pull the panel
High voltage protection shield
To remove the rear flap.
Remove the two screws on the top
the two on the sides
than pull up the shield
Door removing
To remove the door
open the door (90°)
insert two pins/rivets on the holes on the hinge than pull up the door and rotating inside the door extract hinges from housing.
See in the picture how fixed on the body.
Hinge fixing point.
Warning: removing the door means adjust/check door microswitches and micorwaves leakages