Press the icon to set Manual cooking.
- Select a cooking mode.
The cooking modes are: Convection, Steam and Mixed.
 |
 |
 |
Naboo starts with a default temperature based on the mode selected and infinite time.
Once the cooking mode has been set, the following cooking parameters can be customised:
- Temperature
This is set through the touchscreen. Scrolling to the right increases the value and scrolling to the left decreases it. To make an accurate setting, press [+] to increase the value of a unit or [-] to decrease the value of a unit.
The value shown at the centre is the set value, the value shown on the right is the current value.
- Timed / Core probe
Timed cooking is set by default.
To switch to probe cooking, press the related key.
This is set through the touchscreen. Scrolling to the right increases the value and scrolling to the left decreases it. To make an accurate setting, press [+] to increase the value of a unit or [-] to decrease the value of a unit.
The value shown at the centre is the set value, the value shown on the right is the current value.
- Fastdry/Autoclima
This is set through the touchscreen. Scrolling to the right increases the value and scrolling to the left decreases it. To make an accurate setting, press [+] to increase the value of a unit or [-] to decrease the value of a unit.
The value displayed in the centre is the set value.
NOTE:
In appliances equipped with steam generator, the ECOVAPOR and TURBOVAPOR mode selection keys are displayed.
- Fan Speed
This is set through the touchscreen. Scrolling to the right increases the value and scrolling to the left decreases it.
Press the 
button to activate intermittent ventilation (suitable for particularly delicate cooking cycles or holding).
If Time /Core Temperature is set, when finished cooking, a buzzer sounds and a popup signals that cooking is complete.